MODEL NO: MG65/75, MX75

 

MG 65/75

 MG65/75

MX75
Chuck size
Swing over bed 25.59″/29.53″
Swing over carriage 14.17″/18.11″
Center distance 39.37″-157.48″
Loading cap. Bet. Center (kg) 1600 (3520 lbs)
Main moter
40/50 HP
option: 50/60 HP
Spindle speed 3 group 3-1800 rpm
Spindle bore 3.35″
Front bearing diameter 5.91″
Tailstock taper MT No. 5
Rapid feed speed X=236 Z=354/236
Type of turret H4, V8, H4 + V8
Machine weight (kg)
5000 (11000 lbs)
8000 (17600 lbs)
Chuck size
Swing over bed 29.53″
Swing over carriage 18.11″
Center distance 39.37″-157.48″
Loading cap. Bet. Center (kg) 1600 (3520 lbs)
Main moter
40/50 HP
option: 50/60 HP
Spindle speed 2 group 4-1400 rpm
Spindle bore 5.71″
Front bearing diameter 8.66″
Tailstock taper MT No. 5
Rapid feed speed X=236 Z=354/236
Type of turret H4, V8, H4 + V8
Machine weight (kg)
5000 (11000 lbs)
8000 (17600 lbs)
  • 480 mm (18.8″) wide with double V ways, this machine is designed for heavy-duty precision turning.
  • Hand controls are conveniently located in the same position as in conventional lathes.
  • Special low-speed with high torque turning operations can be performed with the heavy-duty headstock, consisting of 8 gears.
  • H-4 turrets are provided as standard, with V-8 in front or H-4 in front and V-8 in rear available as options.
  • For heavy shaft work, a built-in rotating tailstock spindle (110 mm [MT#4] or 160 mm [MT#5]) is optional.